Product ID:ZYTEL, VLM NC010
MSDS Date:11/08/1993
FSC:9390
NIIN:00N053193
Kit Part:Y
MSDS Number: BVPNL

E I DU PONT DE NEMOURS & CO

1007 MARKET STREET
WILMINGTON, DE 19898
US

Emergency Phone: 800-441-3637;800-424-9300(CHEMTREC)

Info Phone: 800-441-7515

Preparer: D.L. LICZWEK

Cage: B0589

E I DU PONT DE NEMOURS & CO

80022 BRUSSEL, DE 19880-0022 BE

Telephone: 32-(0)15-401.505

Cage: B0589

NYLON (NYLON 66)

CAS: 32131-17-2

Fraction By Weight: >98%

OSHA PEL N/K

ACGIH TLV: N/K

LUBRICANT

Fraction By Weight: <2%

OSHA PEL N/K

ACGIH TLV: N/K

STABILIZER

Fraction By Weight: <2%

OSHA PEL N/K

ACGIH TLV: N/K

MAY NOT PROVIDE ADEQ PROTECTION.

RTECS: 9999999ZZ

SHIELD WHEN POSSIBILITY EXISTS FOR EYE & FACE CONT

RTECS: 9999999ZZ

FULL FACE MASK RESP PROVIDES PROTECTION FROM EYE

RTECS: 9999999ZZ

LD50 LC50 Mixture:LD50 (ORAL, RAT)>10,000 MG/KG
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:SINGLE LG ORAL EXPOS (10,000
MG/KG) PRODUCED ONLY SLIGHT INITIAL WEIGHT LOSS. TWO-YEAR TESTS IN
RATS & ONE YEAR TESTS IN DOGS @ LEV OF 10% IN DIET PRODUCED NO
ADVERSE EFTS. RPTD INHAL EXPOS PROD UCED NO GROSS CHANGES & ONLY
MICROSCOPIC LUNG & KIDNEY CHANGES. THE CMPD IS NOT SKIN IRRITANT.
TESTS (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:IN ANIMALS DEMONSTRATE NO CARCIN
ACTIVITY. NO ADVERSE HLTH EFTS ARE EXPECTED FROM HUMAN EXPOS TO
POLYHEXAMETHYLENE ADIPAMIDE, EXCEPT FOR MECH IRRIT OF SKIN & EYES
CAUSE BY PARTICLES. SIGNIFIC ANT SKIN PERMEATION, AND SYSTEMIC TOX,
AFTER CONTACT APPEARS UNLIKELY.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INHAL:CONSULT PHYS IF NEC. IF EXPOS TO FUMES FROM
OVERHEATING/COMBUST, MOVE TO FRESH AIR. CONSULT PHYS IF SYMP
PERSIST. SKIN:CLEANSING SKIN AFTER USE IS ADVISABLE. IF MOLTEN
POLYMER GETS ON SKIN, COOL RAPIDLY W/COLD WATER. DO NOT ATTEMPT TO
PEEL POLYMER FROM SKIN. OBTAIN MED TREATMENT FOR THERMAL BURN.
EYE:IMMED FLUSH W/PLENTY OF WATER FOR @ LEAST 15 MINS. CALL PHYS.
INGEST:CONSULT PHYS IF NEC.

Flash Point:752F,400C
Extinguishing Media:WATER, FOAM, DRY CHEMICAL, CO*2.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . KEEP PERSONNEL REMOVED AND UPWIND OF FIRE.
Unusual Fire/Explosion Hazard:LG MOLTEN MASSES MAY IGNITE SPONT IN AIR.
WATER QUENCHING OF SUCH MASSES IS GOOD PRACTICE. HAZ GASES/VAP
PRODUCED IN FIRE ARE:AMMONIA, CO; SM AMTS OF (SUPDAT)

Spill Release Procedures:NOTE:REVIEW FIRE FIGHT MEASURES & HNDLG (PERS)
SECTIONS BEFORE PROCEEDING W/CLEAN-UP. USE APPROP PERSONAL PROT
EQUIP DURING CLEAN-UP. SWEEP UP TO PVNT A SLIPPING HAZARD.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:COOL, DRY PLACE. KEEP CNTNRS TIGHTLY
CLSD TO PVNT MOISTURE ABSORPTION & CONTAMINATION.
Other Precautions:MEDICAL USE: CAUTION:DO NOT USE IN MED APPLIC
INVOLVING PERM IMPLANTATION IN HUMAN BODY. FOR OTHER MED APPLIC SEE
DU PONT CAUTION BULLETIN NO. H-50102.

Respiratory Protection:NIOSH/MSHA APPRVD AIR PURIFYING RESP W/ORG VAP
CARTRIDGE & NIOSH/MSHA DUST/MIST FILTER MAY BE PERMISSIBLE UNDER
CERTAIN CIRCUMSTANCES WHERE AIRBORNE CONC ARE EXPECTED TO EXCEED
EXPOS LIM. PROT PROVIDE D BY NIOSH/MSHA AIR PURIFYING (SUPDAT)
Ventilation:LOCAL VENTL TO CONTROL FUMES FROM HOT PROCESSING.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:COVERALL CHEM SPLASH GOGG & FACE (ING 5)
Other Protective Equipment:IF THERE IS POTENTIAL CONT W/HOT MOLTEN
MATL, WEAR HEAT RESIST CLOTHING AND FOOTWEAR.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
% VOLAT:1% (WATER). EXPLO HAZ:HYDROGEN CYANIDE & ALDEHYDES. WASTE DISP
METH:PROVINCIAL, & LOCAL REGS. RESP PROT:RESP IS LIM. USE
NIOSH/MSHA POSITIVE PRESS AIR SUPPLIED RESP IF THERE IS ANY POTNTL
FOR UNCONTROLLED RELEASE, EXPOS LEV ARE NOTKNOWN, OR ANY OTHER
CIRCUMSTANCE WHERE NIOSH/MSHA AIR PURIFYING RESP (ING 4)

Boiling Pt:B.P. Text:>482F,>250C
Spec Gravity:1.22-1.38
Evaporation Rate & Reference:NOT KNOWN
Solubility in Water:INSOLUBLE
Appearance and Odor:GRANULES, NO ODOR
Percent Volatiles by Volume:SUPDAT

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS AND OXIDIZING AGENTS.
Stability Condition to Avoid:HEATING ABOVE 340 DEGREES C.
Hazardous Decomposition Products:CYCLOPENTANONE, CARBON MONOXIDE,
ALDEHYDES, AND AMMONIA.

Waste Disposal Methods:PREF OPTIONS FOR DISP ARE (1)RECYCLING, (2)INCIN
W/ENERGY RECOVERY, & (3) LANDFILL. HIGH FUEL VALUE OF PROD MAKES
OPTION 2 VERY DESIRABLE FOR MAT THAT CANNOT BE RECYCLED. TREATMENT
STOR, TRANSPORTATIO N & DISP MUST BE I/A/W APPLIC FED, STATE/
(SUPDAT)

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.